Description
The Quested S7R MKIII is designed to be compact yet offer a bass extension that borders on the line of requiring a sub for the majority of monitoring situations. Incorporating a 6.5” low frequency driver with a double flared front loaded port design means reduced turbulence and a monitor that is very forgiving of placement to walls. The built in amplification provides a total of 190W RMS to the drivers.
The result is an extremely powerful, neutral, articulate and accurate compact monitor perfect for a wide range of music styles from acoustic jazz to house.
All S-Series monitors are phase coherent with each other enabling them to be used in combination in multi-channel systems. Some typical applications include components in multi-channel systems, postproduction, project studios, location recording, and mastering.
Quested S7R MKIII Features:
- Size (WxHxD) 244(w) x 347(h) x 308(d) mm
- Weight 11.7 kgs
- Drivers Bass cone – 1 x 165 mm (6 1/2 “)
- High Frequency soft dome – 1 x 28 mm (1 “)
- Maximum SPL 107dB (c) continuous pink noise @ 1 m (119º dB (c) per pair RMS music)
- Frequency Response 65 Hz-20 kHz ± 2 dB
- Connector XLR and 1/4 inch Jack combo socket
- Impedance 10k electronically balanced with RF filters
- Wiring
- Pin 1 ground Sleeve
- Pin 2 hot Tip
- Pin 3 cold Ring
- Sensitivity -12 dBu to +6 dBu for 96 dB SPL @ 1 m set by 10 position rotary switch on rear
- Subsonic Filter -3 dB @ 30 Hz, 24 dB/oct
- Ultrasonic -3 dB @ 75kHz, 4 dB/oct
- Crossover 1k19
- LF EQ -2/-4 @ 65 Hz
- HF EQ +/- 2 dB @ 10 kHz
- LF output power > 120W RMS
- HF output power > 70W RMS
- T.H.D. < 0.03% at levels up to 1 dB below clip, 20 Hz-20 kHz. typ 0.005% @ 1kHz
- Hum + Noise > -100 dB referred to clip
- Power on Front mounted green LED indicates power applied
- Clip Red LED 2 dB before amplifier clip.
- Optional: Subwoofer SB10R
