Description
The Park Audio V4-1200 is an analog power amplifier for wide range of applications. Is enclosed in a casing of the 2U height. The amplifier is designed to be installed into a standard 19″ rack. 2 x 600 watt 4Ω
V-series amplifiers have high efficiency analog H-class topology and reliable classic power supply, based on toroidal transformer. Built-in crossover allows to use the amps in 2-way sound reinforcement systems
All the protection systems are independent. One channel failure does not impact the operability of the other. Cooling is independent for each channel. Fan direction is from front to back. The unit is provided with smooth automatic cooling control system which changes its intensity depending on the temperature of the output stage. Both channels share the same power supply toroid transformer-based source.
Specifications Park Audio V4-1200 MKIII:
|
V4-1200 |
|
| Output power/Ch. | |
| RMS 2 ohm | – |
| RMS 4 ohm |
600 |
| RMS 8 ohm |
330 |
| Peak 2 ohm | – |
| Peak 4 ohm |
900 |
| Peak 8 ohm |
450 |
| Bridge 4Ohm |
– |
| Bridge 8Ohm |
1200 |
| AC Power | 8A |
| Frequency response* | 20Hz … 20kHz (+/- 0.2 dB, full power) |
| 10Hz … 60kHz (1dB, 1W) | |
| Total Harmonic Dist. | 0.003 % (1kHz) |
| 0.02% (20 … 20kHz) | |
| Damping Factor | 400(1kHz, 8Ohm) |
| Signal-to-Noise | 100dB(unweighted) |
| Crossover Freq.** | 125Hz,12dB/Oct. HP or LP |
| Weight |
15 Kg |
| Cooling | From the front to the back |
| Dimensions | 482mm(width) |
| 96mm(height) | |
| 2U(height in rack) | |
| 414mm(depth) | |
| 375mm(depth in rack) | |
| * Cutoff filters are disabled, 30 Hz, 50 Hz | |
| ** Only when a crossover-equipped input is installed | |
