Description
The Manley Slam stands for “stereo limiter and microphone preamplifier” – and it gets loud fast. Starting with the two tube microphone preamplifiers, the Manley SLAM! gives you 48V phantom power, phase reverse, and up to 60dB of gain and 20dB more gain in the limiter – plenty to accommodate virtually any microphone and singer. On the limiter side, Manley combined the electro-optical circuit from the Elop with a fast FET-based brick-wall limiter and added a handy sidechain.
Manley Slam Features:
- Input Tubes: 2 x 12AT7A NOS GE specially selected by Manley Labs for low noise and stable bias
- Output Tubes: 2 x 6414W NOS USA dual triodes
- I/O: Manley transformer-coupled, Balanced Inputs and Outputs
- Microphon epreamplifier: Selectable 48V phantom power and phase reverse
- Gain: 60dB max Microphone preamplifier, 43dB max DI, 20dB max Limiter Gain
- Input Impedance: 2000 ohms Micpre, 1Meg ohms DI
- FET Limiter: Attack: approx. 100S; Release: 10mS to 2Sec; Ratio: better than 20:1
- ELOP Limiter: Attack: approx. 10mS for 6dB GR; Release: 2.5 Sec; Ratio: 10:1
- Frequency Response: 5Hz to 60KHz
- Maximum Output: +32dBm, +30dBm (into 1Kohm load)
- THD+N: <.05% @ 1KHz
- Dynamic Range: 115dB typical
- Output Impedance: 200 ohms
- Power Consumption Slam!: 0.480 Amps (480 milliamps = 480mA) @ 120V = 57.6 Watts, 0.240 Amps (240 milliamps = 240mA) @ 240V = 57.6 Watts
- Mains Voltage Frequency: 50~ 60Hz
- Size: 19″ X 12″ X 3.5″ (occupies 2 RU)
- Shipping Weight: 25 lbs.
- Manual here
