Description
The Lewitt LCT 640 TS is a condenser microphone. When set to Dual Output Mode the signal of the mics front and back diaphragm is provided by separate circuitries, and any kind of polar pattern can be realized dynamically – even after your recording is complete.
Material that has already been recorded can be changed on the fly by simply adjusting the polar pattern – room sound/noise can be added or decreased, even a complete pattern turn by 180° is possible. After recording with the LCT 640 TS microphone you can use LEWITT’s Polarizer plug-in to tweak the result with magical ease.
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure gradient transducer
- Diaphragm: 3 micron gold sputtered Mylar
- Transducer Ø: 25.4 mm, 1 in
- Polar pattern (Dual Output Mode): Create any polar pattern in post-production
- Polar pattern (Multi-Pattern Mode): omni, wide cardioid, cardioid, supercardioid, figure-8
- Sensitivity:
- 31.4 mV/Pa, -30.1 dBV/Pa (cardioid)
- 30.3 mV/Pa, -30.3 dBV/Pa (omni)
- 34.1 mV/Pa, -29.4 dBV/Pa (figure-8)
- Equivalent noise level: 10.5 dB (A), cardioid
- Max. SPL for 0.5 % THD: 133.8 dBSPL, 0 dB pre-attenuation
- Signal / noise ratio: 83.5 dB (A)
- Dynamic range: 123.3 dB (A)
- Pre-attenuation pad
- 0 dB
- -6 dB
- -12 dB
- -18 dB
- Low-cut filter:
- linear
- 40 Hz (12 dB/oct)
- 80 Hz (12 dB/oct)
- 160 Hz (6 dB/oct)
- Internal impedance: 110 Ω
- Rated load impedance: 1,000 Ω
- Supply voltage: 48 V +/- 4 V
- Current consumption: 5.1 mA
- Mic enclosure: Zinc die cast
- Connector: Gold plated 3-pin XLR + Mini 3-pin XLR
- Microphone dimensions: 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
- Microphone net weight: 425 g, 14.9 oz
- Includes: ShockMount LCT 40 SHx, Magnetic Pop Filter LCT 50 PSx, Windscreen LCT 40 Wx, mic bag DTP 40 Lb, TS adapter cable LTC 40 TS & protective case.
- Manual here
