Description
The Barefoot Footprint 03C Center Channel active monitor is designed to complement the Footprint03 right and left channel monitors, delivering unmatched precision essential for accurate mixes in surround sound and immersive environments. Built on the proven legacy of the acclaimed Footprint03 tri-amplified 3-way design, the Footprint03C ensures seamless tonal consistency when paired with the Footprint03, forming a fully integrated and cohesive monitoring system that elevates any professional setup.
At the heart of the Footprint03C’s innovation is its advanced design, featuring a 1″ ring radiator tweeter, a 3.5″ aluminum cone midrange driver, and two forward-facing 6.5″ aluminum cone woofers, all meticulously crafted to deliver exceptional audio fidelity. Its state-of-the-art magnet and motor systems, copper shorting rings, and enhanced heat-sink technology work together to minimize distortion, support extended driver excursion, and ensure reliable performance even under demanding conditions.
Barefoot Footprint 03C Features:
- Tri-amplified 3-way Center Channel Monitor
- Controls: Input level stepped attenuator, MEME™ voice select
- Analog Input:
- XLR female, Pin 1 ground, Pin 2 positive, Pin 3 negative
- TRS Male, Tip: Positive, Ring: Negative, Sleeve: Ground
- Input Impedance = 20k Ohms
- Input Sensitivity (1m) = 90 dB @ -15 dBV (pass band)
- Analog to Digital Conversion:
- Word Length: 28-bit (56-bit High Precision)
- Sample Rate: 96 kHz
- Signal/Noise ≥ 100 dB
- Frequency Response: 42 Hz–40 kHz (+/-3 dB), 48 Hz–22 kHz (+/- 1 dB )
- Bass Response: -3 dB @ 42 Hz
- Q = 0.707 Slope = 24 dB/octave asymptotic
- MAX SPL: Continuous 104.5 dB
- Cabinet:
- 10.8 liters total internal volume
- Solid aluminum baffle plate
- Polyurethane acoustic damping throughout
- Crossover Frequencies: 400 / 3900 Hz (Active crossover between drivers)
- 3-way architecture spans a 1-inch dual radiator tweeter, a 3.5-inch aluminum-cone midrange driver, and a 6.5-inch aluminum cone subwoofer
- Amplifier: 100W
- HF Amplifier: 60W
- MF Amplifier: 100W
- LF Amplifier: 100W
- Power:
- Mains Voltage Input: 85 VAC to 265 VAC universal
- Idle Power Consumption = 12W
- Maximum Power Consumption = 340W
- Weight: Speaker: 33 lbs each (15 kg)
- Shipping: 40.3 lbs each (18.3 kg)
- Dimensions HxWxD: 20″ x 7.25″ x 9″ (50.8 x 18.4 x 22.9 mm)
- Manual here
