Dynaudio M3 Left
€ 3,653.00
€ 4,225.00
You Save
€ 572.00 (13.5%)
Prices exclusive of VAT
Price per Unit
3 way (five drivers) main-monitor for demanding engineers
The result is a very clean, dynamic and powerful speaker in which common problems, such as cone break up, thermal compression and phase misalignment have been almost eliminated. Frequency response is full and flat, and the overall transparency of sound leaves no doubt that the M3 truly advances the art of monitoring at high levels without sacrificing quality at more relaxing volume.
Levels from 85 to 120dBA exhibit essentially identical timbre allowing total confidence in mix decisions regardless of monitoring level.
Passive or Active
The M3 Main Monitor is available in both Passive and Active versions. Both versions employ the same sophisticated impedance corrected passive crossovers between midrange drivers and tweeter. The Passive version has internal links for simple adjustment of low frequency levels, and is primarily intended for user installation on rigid stands within a control room, although soffit mounting is entirely feasible. The bi-amped Active system uses an active external crossover offering full equalization capabilities together with dual-band electronic driver protection.
Technical Spec:
| System | 3-way Passive Main Monitor |
| Frequency Response (+/- 3 dB) |
30 Hz - 20 kHz |
| Peak SPL 1m, pair (IEC Short Term) |
> 129 dB peak |
| Peak SPL 2m, 5.1 (IEC Short Term) |
> 130.5 dB peak |
| Amplifier minimum | 140 W (> 100 dB SPL @ 2.5m) |
| Sensitivity (2.83 V/1m) | 90 dB |
| Impedance, Nominal | 4 ohm |
| Impedance, HF (200 kHz) | 5.9 ohm |
| Resonance Frequency | 38 Hz |
| Internal Cabinet Volume | 145 liters |
| Bass Principle | Bass reflex |
| Crossover Frequencies | 600/3700 Hz |
| Crossover Slope | Woofer 12 dB/oct; Midrange 12 dB/oct; Tweeter 18 dB/oct |
| Tweeter | Esotar 28 mm/1.1” soft dome, Magnetic fluid, Rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front |
| Midrange | 2x145 mm/5.7” One-piece molded |
| Woofer | 2x300 mm/12”, One-piece molded polyprop cone, 100 mm/4” pure alu wire voice coil |
| Weight | 55.0 kg / 121.3 lbs |
| Dimensions (WxHxL) | 555 x 775 x 505 mm / |
About Dynaudio
A world where audio engineers, consumers, music-lovers and film viewers expects 100% accurate reproduction of sound - the perfect illusion with all the transparency, details and imaging we know from the real world. This is the vision of Dynaudio Acoustics - a world where you trust what you hear without even thinking about loudspeakers.
See other products by Dynaudio
